This chapter describes IBM LAN Emulation Client Functions (ILEC) messages. For information on message content and how to use the message, refer to the Introduction.
ILEC.001 |
Level: C-INFO
Short Syntax: ILEC.001 ILEC function entry/exit tracing
Long Syntax: ILEC.001 ILEC function entry/exit tracing
Description: The user can enable/disable the function entry and exit tracing of the ILEC by simply turning on/off the display of this message.
ILEC.002 |
Level: C-INFO
Short Syntax: ILEC.002 nt network entry_exit log_point
Long Syntax: ILEC.002 network network: ilec trace log: entry_exit log_point
Description: ILEC generic function entry/exit
ILEC.003 |
Level: C-INFO
Short Syntax: ILEC.003 nt network entry_exit log_point, D1= arg1
Long Syntax: ILEC.003 network network: ilec trace log: entry_exit log_point, D1= arg1
Description: ILEC generic function entry/exit with one arg
ILEC.004 |
Level: C-INFO
Short Syntax: ILEC.004 nt network entry_exit log_point, D1= arg1, D2= arg2
Long Syntax: ILEC.004 network network: ilec trace log: entry_exit log_point, D1= arg1, D2= arg2
Description: ILEC generic function entry/exit with two args
ILEC.005 |
Level: C-INFO
Short Syntax: ILEC.005 nt network entry_exit log_point, D1= arg1, D2= arg2, D3= arg3
Long Syntax: ILEC.005 network network: ilec trace log: entry_exit log_point, D1= arg1, D2= arg2, D3= arg3
Description: ILEC generic function entry/exit with three args
ILEC.007 |
Level: UI-ERROR
Short Syntax: ILEC.007 Inbound call rejected, on nt network ID, rsn= reason, hndl= conn_handle, d1= debug1, d2= debug2
Long Syntax: ILEC.007 Inbound call rejected, on network network ID, reason = reason, conn handle = conn_handle, debug1 = debug1, debug2 = debug2
Description: Inbound call rejected
ILEC.011 |
Level: P_TRACE
Short Syntax: ILEC.011 Trace ILEC data packet
Long Syntax: ILEC.011 Trace ILEC data packet
Description: Trace ILEC data packet
ILEC.012 |
Level: P_TRACE
Short Syntax: ILEC.012 Trace ILEC control packet
Long Syntax: ILEC.012 Trace ILEC control packet
Description: Trace ILEC control packet
ILEC.020 |
Level: UE-ERROR
Short Syntax: ILEC.020 nt network error_lvl log_point
Long Syntax: ILEC.020 network network: ilec error log: error_lvl log_point
Description: ilec generic error
ILEC.021 |
Level: UE-ERROR
Short Syntax: ILEC.021 nt network error_lvl log_point, D1= arg1
Long Syntax: ILEC.021 network network: ilec error log: error_lvl log_point, D1= arg1
Description: ilec generic error with one arg
ILEC.022 |
Level: UE-ERROR
Short Syntax: ILEC.022 nt network error_lvl log_point, D1= arg1, D2= arg2
Long Syntax: ILEC.022 network network: ilec error log: error_lvl log_point, D1= arg1, D2= arg2
Description: ilec generic error with two args
ILEC.023 |
Level: UE-ERROR
Short Syntax: ILEC.023 nt network error_lvl log_point, D1= arg1, D2= arg2, D3= arg3
Long Syntax: ILEC.023 network network: ilec error log: error_lvl log_point, D1= arg1, D2= arg2, D3= arg3
Description: ilec generic error with three args
ILEC.024 |
Level: UI-ERROR
Short Syntax: ILEC.024 open frame SAP failed on nt n_net, rc= retcd
Long Syntax: ILEC.024 open frame SAP failed on network n_net, rc = retcd
Description: open frame SAP failed
ILEC.025 |
Level: UI-ERROR
Short Syntax: ILEC.025 open call SAP failed on nt n_net, rc= retcd
Long Syntax: ILEC.025 open call SAP failed on network n_net, rc = retcd
Description: open call SAP failed
ILEC.026 |
Level: UI-ERROR
Short Syntax: ILEC.026 open data path failed for outgoing call, on nt n_net, rc= retcd
Long Syntax: ILEC.026 open data path failed for outgoing call, on network n_net, rc = retcd
Description: open data path failed for outgoing call
ILEC.027 |
Level: UI-ERROR
Short Syntax: ILEC.027 open data path failed for incoming call, on nt n_net, rc= retcd
Long Syntax: ILEC.027 open data path failed for incoming call, on network n_net, rc = retcd
Description: open data path failed for incoming call
ILEC.028 |
Level: C-INFO
Short Syntax: ILEC.028 Function function_name called, nt network ID
Long Syntax: ILEC.028 Function function_name called, on network network ID
Description: ATM ILEC function called
ILEC.029 |
Level: UI-ERROR
Short Syntax: ILEC.029 Start failed, on nt network ID, rc= retcd
Long Syntax: ILEC.029 Start failed, on network network ID, rc = retcd
Description: Start failed for ILEC object
ILEC.030 |
Level: UI-ERROR
Short Syntax: ILEC.030 create ILEC object failed, on nt network ID, rc= retcd
Long Syntax: ILEC.030 create ILEC object failed, on network network ID, rc = retcd
Description: Could not create ILEC object
ILEC.031 |
Level: UI-ERROR
Short Syntax: ILEC.031 usr reg failed, on nt network ID, rc= retcd
Long Syntax: ILEC.031 user registration failed, on network network ID, rc = retcd
Description: ILEC could not register
ILEC.032 |
Level: UI-ERROR
Short Syntax: ILEC.032 nt network ID, ATM nt network ID nt nbld
Long Syntax: ILEC.032 on network network ID, ATM network network ID not enabled
Description: ATM interface not enabled
ILEC.033 |
Level: UI-ERROR
Short Syntax: ILEC.033 ILEC activate failed, on nt network ID, rc= retcd
Long Syntax: ILEC.033 ILEC activate failed, on network network ID, rc = retcd
Description: ILEC activate failed
ILEC.034 |
Level: UI-ERROR
Short Syntax: ILEC.034 ILEC activate complete, on nt network ID, rc= retcd
Long Syntax: ILEC.034 ILEC activate complete, on network network ID, rc = retcd
Description: ILEC activate failed.
ILEC.035 |
Level: UI-ERROR
Short Syntax: ILEC.035 Outbound frame freed, on nt network ID
Long Syntax: ILEC.035 Outbound frame freed, on network network ID
Description: Outbound frame freed
ILEC.036 |
Level: UI-ERROR
Short Syntax: ILEC.036 Outbound frame queued, on nt network ID
Long Syntax: ILEC.036 Outbound frame queued, on network network ID
Description: Outbound frame queued
ILEC.037 |
Level: UI-ERROR
Short Syntax: ILEC.037 Transmit failed, on nt network ID, rc= retcd
Long Syntax: ILEC.037 Transmit failed, on network network ID, rc = retcd
Description: Transmit failed
ILEC.042 |
Level: UI-ERROR
Short Syntax: ILEC.042 SRAM nt fnd on dsbl, on nt network ID
Long Syntax: ILEC.042 SRAM not found after disable, on network network ID
Description: Couldn't find the matching SRAM block after user disabled the ILEC interface.
ILEC.044 |
Level: UI-ERROR
Short Syntax: ILEC.044 Outbnd frm dscrd, on nt net_no,frm sz ( frame_size) xcds cnfgd frm sz ( config_frame_size)
Long Syntax: ILEC.044 Outbound frame discarded, on network net_no, frame size ( frame_size) exceeds configured frame size ( config_frame_size)
Description: An outbound frame was discarded, because the frame's size was larger than the configured frame size.
ILEC.045 |
Level: UI-ERROR
Short Syntax: ILEC.045 Inbnd frm dscrd, on nt net_no,frm sz ( frame_size) xcds cnfgd frm sz ( config_frame_size)
Long Syntax: ILEC.045 Inbound frame discarded, on network net_no, frame size ( frame_size) exceeds configured frame size ( config_frame_size)
Description: An inbound frame was discarded, because the frame's size was larger than the configured frame size.
ILEC.046 |
Level: UE-ERROR
Short Syntax: ILEC.046 ILEC inbnd fr dscrd, bad FC, on nt network ID, word1 word2 word3 word4 word5
Long Syntax: ILEC.046 ILEC inbnd fr dscrd, bad FC, on network network ID, word1 word2 word3 word4x word5
Description: ILEC inbound data frame was discarded - bad FC byte
ILEC.047 |
Level: UI-ERROR
Short Syntax: ILEC.047 nt network ID:ILEC inbnd fr dscrd, bad frame type ( frame_type)
Long Syntax: ILEC.047 nt network ID:ILEC inbnd fr dscrd, bad frame type ( frame_type)
Description: LEC inbound data frame was discarded - wrong frame type
ILEC.048 |
Level: UI-ERROR
Short Syntax: ILEC.048 nt network ID:ILEC inbnd fr dscrd, bad frame type ( frame_type)
Long Syntax: ILEC.048 nt network ID:ILEC inbnd fr dscrd, bad frame type ( frame_type)
Description: LEC inbound data frame was discarded - wrong frame type
ILEC.049 |
Level: UI-ERROR
Short Syntax: ILEC.049 nt network ID:ILEC Inbnd frm dscrd, dst = dest_addr src = src_addr, rsn = reason
Long Syntax: ILEC.049 nt network ID:ILEC Inbound frame discarded, dest = dest_addr source = src_addr, reason = reason
Description: Inbound frame discarded